The REAIM TIG-400G is a versatile, compact welding machine designed for both home hobbyists and small workshop professionals, combining two essential welding functions in one unit: TIG (Tungsten Inert Gas) and MMA/Stick (Manual Metal Arc). This 2-in-1 design eliminates the need for separate machines, saving space and cost.
Powered by a reliable IGBT inverter technology, it delivers stable performance, smooth arcs, minimal spatter, and efficient energy use—perfect for working with carbon steel, stainless steel, and other common metals. It operates on standard 220V household power, making it easy to use almost anywhere without special electrical setups.
The welder features a clear digital display for precise current control, adjustable knobs, and a lightweight, portable build with a top carry handle for easy transport. A 4-meter TIG torch is included right out of the box, so you can start welding sooner.
Built for durability and everyday use, it’s ideal for home repairs, metal art, maintenance tasks, and light fabrication. With reliable performance, dual functionality, and a budget-friendly price, the REAIM TIG-400G is an excellent all-around choice for anyone looking for a capable, convenient welding solution. ✅
✅ Usage Tips & Best Practices
⚡ Before You Start
- Power: Use a stable 220V outlet. Avoid long/cheap extension cords — use max 5m, ≥1.5mm² wire to prevent voltage drop.
- Ventilation: Always use in open/well-ventilated space. Fumes are harmful; avoid enclosed areas.
- Check Connections: Ensure all cables, torch, and ground clamp are tight and clean — loose connections cause overheating/arcing.
- Safety First: Wear welding helmet, leather gloves, long-sleeve protective clothing, and closed shoes. Keep a fire extinguisher nearby.
🔧 TIG Welding Mode
1. Gas Setup: Connect argon gas regulator. Set flow rate to 8–12 L/min. Purge hose before welding.
2. Electrode Prep: Sharpen tungsten to a sharp point for stable arc. Use correct type:
- ⚡ Pure Tungsten (Green) → aluminum/magnesium
- ⚡ 2% Ceriated (Grey) → steel/stainless steel
3. Current Setting: Start lower than needed; fine-tune using the digital display.
4. Arc Start: Hold torch 3–5mm from workpiece; press torch switch. Keep a steady, short arc length.
🔧 MMA / Stick Welding Mode
1. Electrode: Match rod type to metal (e.g., E6013 = general steel; E308L = stainless). Dry damp electrodes first.
2. Polarity: Most rods use DC+ (electrode holder). Check rod label.
3. Current: Set based on rod diameter:
- 2.5mm → 70–100A
- 3.2mm → 100–140A
4. Technique: Strike at 15–20° angle. Keep arc length roughly equal to rod diameter. Travel steadily.
🛡️ Care & Maintenance
- Cool Down: After 15–20 mins continuous use, pause briefly — don’t run at max output nonstop.
- Clean: Blow dust out with low-pressure air every 2–4 weeks. Keep vents clear.
- Store: In dry place. Moisture = rust & electronics damage.
- Cables: Avoid kinking or dragging — protects internal wires.
⚠️ Quick Troubleshooting
- Unstable arc → Check ground clamp, clean metal surface, adjust gas flow
- Too much spatter → Lower amperage slightly; check polarity
- Machine cuts out → Overheat protection active — wait 5–10 mins to cool
→ MAYA BANK/WALLET⛓️💥
Maya Wallet makes quick, secure payments, sends cash, buys load, and manages your money easily from your phone.
Services: Send, pay, load, save, invest, insure, and shop easily.
